===== Flash Bootloader =====
----
ATTENTION! Bootloader upgrade is a risky operation and should not be performed unless absolutely necessary! If anything goes wrong
during this process (power shortage, mistype, etc.) the board will be BRICKED (broken). Keep in mind that warranty does not cover Cherry module if it is damaged due to user's fault.
----
1. Install ''tftp'' server.
2. Copy ''u-boot'' binary to the ''tftp'' directory.
3. Set ''192.168.1.254'' IP address on your tftp server's ethernet interface.
4. Reboot Cherry and press ESC when prompted to enter bootloader then press a few times to clear console buffer.
5. Set local and server IP addresses:
setenv ipaddr 192.168.1.1
setenv serverip 192.168.1.254
6. Download u-boot binary into Cherry's RAM.
tftpboot 44000000 u-boot-cherry.mbn
7. Write u-boot binary from RAM to FLASH memory. **Warning: do not proceed with this step if step 5 failed !!!**
sf probe; sf erase 0x110000 0xa0000; sf write 44000000 0x110000 ${filesize}
8. Reset board:
reset