====== Connecting UPER1 on Windows ======

  * Connect the UPER board to your computer using USB cable. 

  * Download UPER device [[https://github.com/8devices/UPER/blob/master/drivers/drivers.zip|drivers]] and extract them on your computer. 

  * Open up windows [[http://www.computerhope.com/issues/ch000833.htm|Device manager]]. In the //Other devices// section you should see two devices (UPER COM and UART Bridge) with yellow exclamation marks.

{{ :gettingstarted:uper:1:connect:windows_dm_unrecognized.png?direct&600 |Windows Device manager}}

  * Press right mouse button on UPER COM device and click "Update driver software". In the following dialog choose "Browse my computer for driver software".

{{ :gettingstarted:uper:1:connect:windows_dm_browse.png?direct&600 |}}

  * In the next window browse for a path where you have extracted the device drivers, check "Include subfolders" and click next. Windows should now install device drivers. If you get an error or driver signature warning, which does not allow to continue installation, please set (temporarily) your computer date before the 29th April 2014 and try again.

{{ :gettingstarted:uper:1:connect:windows_dm_driverpath.png?direct&600 |}} 

  *  Repeat the same steps with UART Bridge device. Once finished you should be able to see two new devices in the Ports category.

{{ :gettingstarted:uper:1:connect:windows_dm_installed.png?direct&600 |}}