===== Flash Firmware =====

This section covers a few methods to flash firmware onto your Jalapeno.

----

=== Web interface / LuCI ===

Connect to your Jalapeno web interface and navigate to (**System → Backup / Flash Firmware**),\\
then select your firmware image and press ''Flash image'', on the next page click ''Proceed'' to begin flashing.\\ //**Note: this method is only applicable for official OpenWRT (.bin) release images, 8device release (.ubi) not supported!**//

{{:jalapeno:flash.png?nolink|}}

----

=== Sysupgrade ===

Connect into Jalapeno and download the binary image to RAM under ''/tmp''. \\
(Alter your username, IP and path to match your binary image location)

  scp tester@192.168.1.254:/home/tester/openwrt-8devices-v3.1-ipq40xx-8dev_jalapeno-squashfs-nand-factory.ubi /tmp

Perform upgrade procedure __with__ configuration reset:

  sysupgrade -F -v -n /tmp/openwrt-8devices-v3.1-ipq40xx-8dev_jalapeno-squashfs-nand-factory.ubi

Perform upgrade procedure __without__ configuration reset:

  sysupgrade -F -v -c /tmp/openwrt-8devices-v3.1-ipq40xx-8dev_jalapeno-squashfs-nand-factory.ubi