====== Getting Started ====== 
===== Connect =====

Connecting to Jalapeno is pretty easy. There are several ways of doing this. My personal recommendation is: 
  * Serial: **picocom** for Linux and OSX, **putty** for Windows.
  * Ethernet: **ssh** for Linux and OSX, **putty** for Windows.

==== Serial ====
 Jalapeno features on-board USB to Serial FTDI interface. It is also powered by USB.

=== putty (Windows) ===
Pretty straight forward. Run program, enter COM port number, select baudrate 115200 and click "connect".

=== picocom (Linux, OSX) ===
  picocom -b 115200 /dev/ttyUSB0

  * Picocom [[http://linux.die.net/man/8/picocom|man]] 
  * To exit, press and hold CTRL, a, q.
=== Telnet (Linux, OSX) ===

New OpenWRT versions (which are installed in our devices) don't have telnet service installed by default. 
==== Ethernet ====
=== putty (Windows) ===

Putty can be used for SSH, Telnet and Serial connectivity. It's a Swiss knife tool for Windows. Usage is as simple as in serial mode. Run, enter IP address, select protocol and connect.
=== ssh (Linux, OSX) ===

SSH is enabled by default without password. Jalapeno can be connected:

  ssh root@192.168.1.1

Where ''root'' is your default root user and 192.168.1.1 IP address.

==== Advanced ====

[[jalapeno:gettingstarted:connect-advanced]]
===== Build firmware =====

This procedure must be performed on your computer. We use Debian and Ubuntu but many other distributions should work. It is also possible to build on OSX. Building on Windows platform is not recommended. 

==== Install packages to your computer ====

In order to build OpenWrt, you will need few software packages on your computer. Some are mandatory, some optional.

  sudo apt-get install subversion g++ ncurses-term zlib1g-dev gawk flex patch openssh-server minicom picocom tftp tftpd gettext libncurses5 libncurses5-dev unzip quilt git git-doc git-gui libxml-parser-perl libssl-dev

==== Get latest sources ====
Get latest sources from 8devices OpenWrt branch.

  git clone --branch openwrt-snapshot_r9911-ipq40xx-4.14 https://github.com/8devices/openwrt-8devices.git
  cd openwrt-8devices
  
==== Build image ====
If you are building firmware for the first time run following commands to build manually:

  ./build.sh

This will update package feeds and build minimal image firmware image. 
If you want to customize your build look for more details in [[jalapeno:gettingstarted:build-advanced|advanced]] section.


Note that building OpenWrt firmware takes some time. On moderate computer it might take 1 to 3 hours. CPU load during this process is usual close to 100%. Building environment takes up about 12GB of hard disk space.
You should see build log like this:

{{:jalapeno:build.png?nolink|}}

Image will be available in ''bin/targets/ipq806x/generic'' folder. 

==== Advanced ====
If you feel like something is missing or looking for some goodies, this section is for you.

  * [[:jalapeno:gettingstarted:build-advanced]]

==== Useful links ====

  * [[http://wiki.openwrt.org/doc/howto/build?s|Openwrt building (official web page)]]

===== Upload firmware =====
This section covers few methods how to upgrade firmware on Jalapeno. Some methods require only USB-Serial connection, some only LAN, some LAN and Serial. Also you might need to install/setup other software to perform these tasks.

==== Web interface / LUCI ====
This method is recommended for novices. Connect to Jalapeno web interface, browse for firmware upgrade (System -> Backup / Flash firmware), select file and press upgrade.

==== sysupgrade ====
Login to Jalapeno and download binary image to RAM. (Alter IP and path to match your binary image location)

  scp test@192.168.1.254:/home/test/openwrt-8devices/bin/targets/ipq40xx/generic/openwrt-8devices-v3.1-ipq40xx-8dev_jalapeno-squashfs-nand-factory.ubi /tmp

Perform upgrade procedure.

  sysupgrade -v -n /tmp/openwrt-8devices-v3.1-ipq40xx-8dev_jalapeno-squashfs-nand-factory.ubi
  
Or if you wish to save configuration files:

  etc/ethers
  etc/config/wireless
  etc/config/system
  etc/config/network
  etc/config/dropbear
  etc/config/firewall
  etc/config/dhcp
  etc/dropbear/dropbear_rsa_host_key
  etc/dropbear/dropbear_dss_host_key

type:

  sysupgrade -v -c /tmp/openwrt-8devices-v3.1-ipq40xx-8dev_jalapeno-squashfs-nand-factory.ubi

==== Advanced ====

[[:jalapeno:gettingstarted:flash-advanced]]

[[:jalapeno:gettingstarted:power-consumption]]