===== Flash Firmware ===== This section covers a few methods to flash firmware onto your Lima. ---- === Web interface / LuCI === Connect to your Lima's web interface and navigate to (**System → Backup / Flash Firmware**),\\ then select your firmware image and press ''Flash image'', on the next page click ''Proceed'' to begin flashing. {{:lima:flash.png?nolink|}} ---- === Sysupgrade === Connect into Lima and download the binary image to RAM under ''/tmp''. \\ (Alter your username, IP and path to match your binary image location) scp tester@192.168.1.254:/home/tester/openwrt-8devices-v2.10-ar71xx-generic-lima-squashfs-sysupgrade.bin /tmp Perform upgrade procedure __with__ configuration reset: sysupgrade -v -n /tmp/openwrt-8devices-v2.10-ar71xx-generic-lima-squashfs-sysupgrade.bin Perform upgrade procedure __without__ configuration reset: sysupgrade -v -c /tmp/openwrt-8devices-v2.10-ar71xx-generic-lima-squashfs-sysupgrade.bin ---- === Memory technology device === This is an alternative firmware upgrade method that also begins by copying the firmware image into RAM. scp tester@192.168.1.254:/home/tester/openwrt-8devices-v2.10-ar71xx-generic-lima-squashfs-sysupgrade.bin /tmp Afterwards, execute the following: mtd -r write /tmp/openwrt-8devices-v2.10-ar71xx-generic-lima-squashfs-sysupgrade.bin firmware