====== RED bean ====== ==== Specification ==== |**SoC:** | QCA9377 | |**Wireless standard:** | 802.11b/g/n/ac | |**Frequency:** | 2.4GHz & 5GHz | |**Max data rate:** | 433 Mbps | |**Max output power:** | 20 dBm | |**Antenna port:** | Connectorized (Murata HSC type connector: MM4829-2702RB0) or an integrated dual-band antenna version | |**Power supply:** | 3.3V, power consumption 0.5W | |**Available interfaces:** | SDIO 3.0, UART | |**Temperature range:** | -40oC to +85oC (-40F to 185F)| |**Mounting:** | Dual side | |**Weight:** | 0.9 g (0.0019 lb) or 1.1 g (0.0024 lb) | |**Size:** | 17 x 12 mm (0.67 x 0.47 inch) or 24 x 12 mm (0.94 x 0.47 inch) | |**Driver:** | qcacld-2.0 | |**Certifications:** | - | ---- ===== Guides ===== [[red-bean:userguide|Quick User Guide]] ---- ==== Software How To ==== === qcacld-2.0-lea-2.0 === == caf-wlan/LNX.LEH.4.2.2.2 == [[red-bean:compile-linux|Compile Driver for Linux]] [[red-bean:compile-BD-SL-i.MX6|Compile Driver for Linux (BD-SL-i.MX6)]] [[red-bean:compile-espressobin|Compile Driver for Linux (ESPRESSObin)]] [[red-bean:compile-android-x86|Compile Driver for Android (x86)]] [[red-bean:compile-android-raspberry|Compile Driver for Android (Raspberry Pi)]] === qcacld-2.0-lea-3.0 === == CNSS.LEA.NRT_3.0 == [[red-bean:compile-lea3-BD-SL-i.MX6|Compile Driver for Linux (BD-SL-i.MX6)]] [[red-bean:compile-lea3-raspberry|Compile Driver for Raspberry Pi]] [[red-bean:compile-lea3-espressobin|Compile Driver for ESPRESSObin]] ---- ===== Downloads ===== {{::red-bean:red_bean_datasheet.pdf|Datasheet}} {{::red-bean:red_blue_ukca_declaration_of_conformity.pdf|UKCA declaration of conformity}} {{::blue-bean_red-bean_ce_declaration_of_conformity_2021.08.10.docx.pdf|CE declaration of conformity}} {{::{{:8dev_reach_declaration_2024.07.01.pdf|REACH declaration}} {{::8dev_rohs_declaration_2019.02.22.pdf|ROHS declaration}} {{:8devices_cmrt_6.22.xlsx|Conflict Minerals statement}} ---- ===== Test Reports ===== [[red-bean:sdio3-performance-test|SDIO3 performance]]