Connect

How to connect to your brand new Lima? There are a couple of ways to do this and we do recommend:

Serial connectivity is already integrated on your Lima via mini USB. If you are powering it using a USB to mini USB cable then there is nothing else required for you to plug in to use a serial terminal.


Putty (Windows)

Simply run the program, enter a COM port number, select the baudrate 115200 and click "connect".


Picocom (Linux, OSX)

Just run picocom with 115200 bps and a serial interface parameter. Your serial device might be named /dev/ttyUSB[n] where [n] is your serial id set by your operating system.

picocom -b 115200 /dev/ttyUSB0

You can check your available serial devices with this command:

ls /dev/ttyUSB*

To exit from picocom press CTRL+a+x.