https://wiki.8devices.com/ 2026-08-15T16:45:08+03:00 https://wiki.8devices.com/ https://wiki.8devices.com/lib/tpl/8dev-bs/images/favicon.ico text/html 2022-04-04T16:28:26+03:00 https://wiki.8devices.com/gettingstarted:uper:1:connect:linux * Open up a terminal and enter ls /dev/ttyACM*. * Connect the UPER board to your linux machine using USB cable. * Type ls /dev/ttyACM* again and you should see two new entries. Most often it will be /dev/ttyACM0 and /dev/ttyACM1. In any case, the device with the lower index should be UPER Command port, and the other - UART bridge (USB COM port adapter). * If you can't see new devices, that means you need to install USB CDC ACM drivers into your system and try again. The installation proc… text/html 2022-04-04T16:28:26+03:00 https://wiki.8devices.com/gettingstarted:uper:1:connect:macos * Open up a terminal and enter ls /dev/tty.usbmodem*. * Connect the UPER board to your linux machine using USB cable. * Type ls /dev/tty.usbmodem* again and you should see two new entries. ~CLEAR~ text/html 2022-04-04T16:28:26+03:00 https://wiki.8devices.com/gettingstarted:uper:1:connect:windows * Connect the UPER board to your computer using USB cable. * Download UPER device drivers and extract them on your computer. * Open up windows Device manager. In the Other devices section you should see two devices (UPER COM and UART Bridge) with yellow exclamation marks.