Differences
This shows you the differences between two versions of the page.
|
kiwi:userguide [2026/02/03 14:38] augustas.p |
kiwi:userguide [2026/02/04 11:07] (current) augustas.p |
||
|---|---|---|---|
| Line 17: | Line 17: | ||
| ==== Power on ==== | ==== Power on ==== | ||
| - | Kiwi can be powered by a DC connector. A LED (marked ''**UART TX**'' on our development kit, just above the UART connection) should light up and blink while device is powering up. Give it at least 30 seconds to boot. | + | Kiwi can be powered by a DC connector. If USB-C serial is connected, a LED marked ''**UART TX**'' on our development kit, just above the UART connection, should light up and blink while device is powering up. Either way - if serial is on or off, wait approx. 30-40 second and you should be good to go. |
| ==== Link up ==== | ==== Link up ==== | ||
| Line 28: | Line 28: | ||
| ssh root@192.168.1.1 | ssh root@192.168.1.1 | ||
| - | Or via telnet: | ||
| - | |||
| - | telnet 192.168.1.1 | ||
| Or via your internet browser with the following URL: | Or via your internet browser with the following URL: | ||