Connection settings

  • 115200 8N1, no hardware flow control.

Windows

I recommend using V-term32 (no need to install just unzip and run) or TeraTerm program.

Linux minicom

TODO

Linux picocom

picocom -f n -p n -b 115200 -i -r -l /dev/ttyUSB0
picocom -b 9600 /dev/ttyUSB0
  • To exit, press and hold CTRL, A, Q.

Other Linux uart settings and useful commands

If you do not have installed stty you should get it by typing 

opkg install coreutils-stty

To set options: 

stty -F /dev/ttyUSB0 cs8 9600 ignbrk -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke noflsh -ixon -crtscts

To get options: 

stty -a -F /dev/ttyUSB0

To read from device 

tail -f /dev/ttyUSB0