This is an old revision of the document!

Setting up Kiwi x Noni setup

Kiwi supports up to 2 Noni radios via M2 A+E PCIe slots, when using the FW that is built following instructions from: Build Firmware.

Currently to see working Kiwi x Noni setup there is a need to change the board-2.bin file inside ath12k/QCN9274/hw2.0/, as the one flashed via FW flash process is faulty. Follow these steps to change board-2.bin file inside Kiwi/DVK:

  1. Switch DIP switches mode to A+E to enable M2_SLOT_1 and M2_SLOT_2, for more information check: DIP switches
  2. Download new ''board-2.zip file''
  3. Extract/unzip board-2.bin file
  4. Send it to the device via ssh connection: 
    scp ./board-2.bin root@192.168.1.1:/lib/firmware/ath12k/QCN9274/hw2.0
  5. Reboot the device and Noni radios should be up and running alongside the internal one.